Skip to next element
Principles of Sound

Be A Theater Pro:

5 Tips To Build Theater Sound The Way the Pros Do It

Be A Theater Pro:

When the pros work to recreate that Dolby Cinema experience at home, they do so knowing that professional movie sound is built not around gimmicks or excess channels, but around accuracy, balance, and full-range performance. Film transfer engineers have developed the gold standard approach to creating reference-grade 5.1 theater sound, and we’ll explain how—along with sharing some practical, professional-approved tips for setting up a home theater that delivers clarity, impact, and realism the way the director intended. Along the way, we’ll explain how REL subwoofers can bring professional theater principles into the home, playing a critical role in restoring true full-range bass to every channel.

Contents

Who Are The Real Theater Pros?

When I say pros, I don’t necessarily mean installers or salespeople working in stores—though we love all of those too, they work hard for a living. The real pros are the guys who make movie soundtracks; those responsible for converting a movie soundtrack into a home theater 5.1 track for Blu-ray, mastering engineers working in transfer studios.

If you’re new to pro-grade theater—and most of our customers and dealers are—these master sound engineers create the equivalent to a 2-channel recording of live sound in a natural acoustic venue that we hold so dear. Their master tape is closest to the truth in theater; the experience the director envisioned.

In movies, 98% of all the sound you hear was added in after-the-fact. That we are rarely aware of this—that the sound appears to effortlessly represent what our eyes see as onscreen reality—is a testimony to the skill of these painstaking craftsmen and women. When transferring from the actual big screen movie soundtrack to smaller-screen formatting for home use in the transfer studio, the final result is the closest thing to a reference that exists in the entire chain.

What Does “Full Range” Really Mean in Professional Theater?

So, did you know that most professional transfer studios operate in 5.1 systems exclusively? Why? Because it’s the purest, hardest thing to get right. They know that if they layer on more channels and add more pizzazz, it will distract most listeners. Their job is to do justice to both the original movie and the director’s intent, and just as with dedicated music recording engineers, the hardest way—the simplest, purest article—is almost always superior.

Okay, you say, they only have 5 main speakers and a sub. Big deal. Actually, it is. The way professionals define a Dolby channel is 5 speakers capable of producing 20 Hz FLAT at an average output of 105 A-weighted decibels, or dBA. There are precious few consumer loudspeakers under $200,000 per pair that will meet that specification—and extraordinary lengths are gone through to accomplish this. At the Saul Zaentz Film Center in Berkeley, CA who have been very generous with their time and education over the years, the 5 main speakers—Westlake, I recall—are built into concrete bunkers within the walls. And before we get any died-in-the-wool audiophiles turning up their noses at studio speakers, let me assure you the sound is extraordinary. Fluid, effortless, dynamic and utterly transparent in the way that only those of us who often work around master tapes will recognize. Sorry guys, once you’ve worked around original, uncompressed source material—I promise, it’s a whole different game.

“Okay,” you may be thinking, “so they have 5 really fine main speakers–but I can’t recreate that, I don’t have access to the masters and I don’t own $30,000 pro monitors.” No, but… the similarities to doing it properly in high-end 2-channel systems and pro transfer studios are striking. Both seek to create the purest, most natural delivery of sound for their respective mediums. And if you own a REL, you have a secret advantage—because we can turn your loudspeakers into something much more like the full range bass those massive pro monitors deliver.

5 RELTips to Build Theater Sound the Right Way

1st Tip - Hottest Tip of All: Set All Speakers to Full Range 

God bless Ray Dolby and all of the talented men and women at Dolby Labs who insist to this day that every home theater processor—no matter if it is in a $299 Pioneer receiver or a $30,000 Datasat AV processor­—include the ability to produce “Full Range” sound from each channel in a 5.1 set-up. Assuming you are not bent upon destroying the gear you love and possess a modicum of common sense, please set your main speakers—given the option ALL your speakers—to Full Range. The Dolby crew know that for theater to work properly at home—or anywhere for that matter—Full Range from all 5 (or more) main channels is crucial to properly delivering the experience. In our experience, most high quality 6.5" (170 mm) speakers (and larger) can take advantage of this technique. 

Planar center channel and HT/1205 MKII  setup shown in image.

2nd Tip – Don’t Skimp on Center or Surround Speakers

Do not skimp on your center or surround speakers—and while I am on my soapbox, stop buying crappy surrounds from manufacturers who don’t understand this. There are enough good companies making quality and affordable surround speakers that produce a credible 60 Hz. When I see pointlessly incompetent surround speakers made with 2.5"–3" drivers whose manufacturers claim 60-90 Hz—but really deliver nothing below 120 Hz­—it seriously pisses me off. Customers have a right to trust manufacturers, and when designers engage in this sort of behavior customers can and should boycott those designs.

Planar rear channel setup with speaker options shown in image

3rd Tip - Point Your Center Placement at the Main Listening Seat

Take extra care when setting up your center channel; please make sure it points virtually directly at the main/prime listening seat(s) for best results. Even an inch (25.4 mm) of shelf sticking out in front of the center channel is enough to blur intelligibility. Make sure the front surface of your center channel is clear of every other surface.

4th Tip - The Big No-No: Avoid the Over-Boosted .1/LFE Trap

Most soundtracks have perhaps twenty percent or less of the movie in which any signal at all is present on the .1/LFE channel when speakers are set to “Large.” This means for eighty percent of the movie, you effectively have no subwoofer. Since most folks don’t recognize this, they try to compensate by turning up the volume of the .1 channel—but since there is no signal present, this accomplishes nothing. In frustration, they turn the volume all the way up. Still no gratification, but then the big no-no happens: they finally put in a movie with outrageously over-boosted .1/LFE—films like Transformers (any of them), Iron Man (ditto), etcetera—and then you hit pay dirt with some herculean blast of low bass (for the engineers among you, we consistently measure +16Db above a nominal average loud listening level). Finally, there is an actual signal present at very high levels! Only, the result is blown subwoofer drivers. The simplest trick to ensure this never happens to you is, once you feel comfortable with the system and BEFORE you start in with the blockbusters, unplug the main speakers, and make sure to put a piece of tape over the connector so nothing shorts out. Now you’ll be able to hear what the sub is—or is not—doing. Once you have a feel for the content, re-connect your main speakers and run a torture test track, slowly increasing the gain of the .1 channel until it properly supports the loudest, baddest .1 track you know of (Chapter 14 of Iron Man 1 is a good starting point). Run the whole system up to as loud as you feel comfortable and set the level of the sub just below distortion. Now, you know that barring a track even more insanely loud, you are covered against all circumstances and should be safe.

Planar PL-2 shown in image

5th Tip - Really, It Works: Use REL's High Level Connection for True Full-Range Performance

Finally, a self-serving pitch for those of us running REL’s using their “High Level” function—creating the equivalent of those big full range professional speakers we talked about earlier for a fraction of the price—and concurrently run the .1 channel set using the instructions discussed above in The Big No-No. Add another REL for center channel support, and a third unit to support the surround speakers, and you have the least expensive way to replicate what occurs on transfer stages every day. We call it REL 3D. Now, you will finally be able to hear what Dolby and 25 years of transfer engineers have known—full range, all channels, professional intent at home. It’s amazing. And it’s free. To read more about Theater Setup check out  Crafting REL 3D for Full-Range Home Theater Sound.

share article

The Best REL for Your System

We pride ourselves on designing powered subwoofers that work with any speaker. Looking to find the best REL for your system?

Look no further than our Speaker Pairing Tool.